This ‘High Speed Craft Human Factors Engineering Design Guide’ (HSC Human Factors Design Guide) has been developed to assist in the design of High Speed Craft and particularly with the aspects relating to the crew and passenger, e.g. the high level of shock and vibration exposure that they are exposed to. The guide uses a simplified theoretical design process, broken down into Feasibility, Main and Detail design phases, on to which Human Factors design features are inserted at the appropriate points in the design process.
The authors recognise that designers and manufacturers use a variety of design processes and timelines but it is anticipated that the design activities identified within the simplified process are recognisable to the majority of Naval Architects and Designers, and therefore that the appropriate Human Factors input can be facilitated at the appropriate points during the design process used.
This guide provides assistance to address a number of the Human Factors issues related to the design and operation of High Speed Craft (HSC). This High Speed Craft Human Factors Engineering Design Guide provides the following:
In general, the scope of craft addressed by this guide may be characterised by the crew/passenger being required to remain in their seating/standing positions during transits, particularly when operating in poor sea conditions. The types of craft that the guide is envisaged to assist in the design of include:
The Guide is divided into two parts:
Part 1. Provides background information and the development of the integrated Naval Architecture-Human Factors design process. It is designed to provide an introduction into the use of Human Factors within the design process and how the authors developed the integrated design process. This section also provides background on the High Speed Craft design process for stakeholders who are not familiar with the design process within the procurement cycle.
Part 2. Provides the Human Factors (HF) information required to support the designer at the appropriate points throughout the HSC design and evaluation processes. It provides the Designer and stakeholders with Human Factors (HF) information tailored to the design process phases (Feasibility, Main and Detail design phases), and at an appropriate level of detail for each phase.
Additionally, more detailed information is provided for stakeholders who require more in-depth knowledge of specific HF issues.
The HF information is divided into ten sections, within which more comprehensive information is provided. Subsequently case studies are provided as examples of how HSC have been designed with HF as an integral part of the design process. The Human Factors sections are:
Each of these Human Factors sections provide a short general introduction and cues to the Human Factors issues to be addressed within the different design phases. More detailed additional information is subsequently included with references where appropriate. Many of the sections are designed so that they may be referred to as stand-alone sections. Because of this acronyms are given in full at the start of each section, and references and further reading being provided in the footnotes
Provide detailed anthropometric data on which to base a HSC design. This is to ensure that the dimensions are not taken out of context, and because different nations have differing operator sizes. The designer should refer to the appropriate countries most up-to-date source of appropriate anthropometric data. Examples of anthropometric data sources are given within the appropriate Sections.
DISCLAIMER: The examples of the ergonomic design process and solutions contained within this document are provided for illustration purposes only, and do not reflect the official policy of any of the contributing organisations. The author¹s, contributors, sponsors and supporters take no responsibility for the content or any liability arising from its implementation.
RELEASE CONDITIONS: This document has been prepared for the UK MOD and is distributed under the organisation of the ABCD Working Group. It may be used and circulated without restriction.
COMMENTS & FEEDBACK: The authors welcome comments and feedback on this guide.
These can be submitted at this link.
